@article { author = {Moradi Chonghoralu, Payam and Nazarnejad, Habib and Asadzadeh, Farrokh}, title = {Comparison of particle size distribution of sediments in mountain and river sand and gravel mining in Urmia City}, journal = {Water and Soil Management and Modelling}, volume = {2}, number = {3}, pages = {52-65}, year = {2022}, publisher = {University of Mohaghegh Ardabili}, issn = {2783-2546}, eissn = {2783-2546}, doi = {10.22098/mmws.2022.10187.1078}, abstract = {Introduction Sand mines are one of the most important active mines. One of the key properties of sediments is their particle size distribution, which affects many physical and chemical properties such as hydraulic and electrical properties and characteristics related to the transportability by erosive agents. Determining the size of sediment particles in different environments can be used in reclaiming sediments from washing river and mountain sand mines for physical and chemical remediation of soil. By determining the size of sediment particles in different environments, it is possible to measure the reuse of sediments from washing river and mountain sand mines for physical and chemical remediation of soil.Materials and Methods The main aim of this study was to compare the capability of some mathematical models in describing particle size distribution of sediments of 26 sand mines in Urmia. For this purpose, sampling was performed from mine sedimentation ponds. By examining each of the mines, in the field surveyes of sediment ponds, sediment sampling was done. In sampling of each mine, three samples were taken from three different points of stilling pond (entrance, middle and end of the pond) in depth (approximate depth of 20 cm) and composed of sediment accumulation profiles with approximately one kilogram weight. The particle size distribution was determined by hydrometric method. In order to describe the sediments, 4 mathematical models of sediment size distribution including Weibull, Fredlund, Van genuchten and Jacky models were used. Different aspects of models performance were evaluated by some efficiency criteria.Results and Discussion The samples taken from mountain and river mines were in the sandy loam and loamy texture class, respectively, so they have fine to medium grain texture. The results showed the difference between the amount of particles forming river and mountain sediments and there is small difference between river and mountain sediments in terms of the amount of component particles. In mountain sediments, the amount of clay, silt and sand is much more than river sediments and the amount of sand in river sediments is more than mountain sediments. Based on the results, most of the sediments are sand, silt and very fine sand and clay, respectively. Six efficiency coefficients were used to evaluate the accuracy of sediment particle grading models. The results showed that Fredlund model had better performance in describing sediment size distribution than other models.Conclusion Analysis of daily, monthly, seasonal and annual trends of precipitation and minimum and maximum temperatures in the period Fredlund model has the lowest error compared to other models and increasing the number of model parameters is not a reason to increase the accuracy of the model.It is suggested that the physical and chemical properties of sediments of mountain and river sand mines be studied separately so that according to different origins and different processes involved in their formation, the feasibility of using these sediments for soil optimization can be investigated.}, keywords = {Fredlund model,Particle diameter,Sand mine,Sediment}, title_fa = {مقایسۀ توزیع اندازة ذرات رسوبات معادن شن و ماسۀ کوهی و رودخانه‌ای شهرستان ارومیه}, abstract_fa = {معادن شن و ماسه از مهم‌ترین معادن فعال کشور بوده و نقش مهمی در پیش‌برد پروژه‌های عمرانی دارد. توزیع اندازۀ ذرات رسوبات، یکی از خصوصیاتی است که بر سایر ویژگی‌های فیزیکی و شیمیایی آن تأثیر دارد. هدف از این پژوهش، بررسی دانه‌بندی رسوبات برداشت‌شده از 26 معدن شن و ماسة شهرستان ارومیه است که 19 معدن از نوع معادن شن و ماسة کوهی و هفت معدن نیز جزو معادن رودخانه‌ای است. برای این منظور از حوضچه‌های رسوب معادن، نمونه‌برداری و توزیع اندازة ذرات آن‌ها به روش هیدرومتری انجام شد. با بررسی هر یک از معادن، در بازدید میدانی از حوضچه‌های رسوب، نمونه‌گیری رسوب از آن‌ها صورت گرفت. برای نمونه‌برداری از هر معدن، از سه نقطة مختلف حوضچۀ آرامش (ورودی، میانه و انتهای حوضچه) تعداد سه نمونه به‌صورت عمقی (عمق تقریبی یک الی 20 سانتی‌متر) و مرکب از پروفیل تجمع رسوبات با وزن تقریبی یک کیلوگرم برداشت شد. به‌منظور توصیف رسوبات از چهار مدل ریاضی توزیع اندازۀ رسوبات شامل مدل ویبول، فردلاند، ون‌گنوختن و جکی استفاده شد. برای ارزیابی دقت مدل‌های دانه‌بندی ذرات رسوب، از شش ضریب کارایی استفاده شد. نتایج نشان‌دهنده تفاوت میزان ذرات تشکیل‌دهندة رسوبات رودخانه‌ای و کوهی است و اختلاف بسیار کمی بین رسوبات رودخانه‌ای و کوهی از نظر مقدار ذرات تشکیل‌دهنده وجود دارد. در رسوبات کوهی، میزان رس، سیلت و شن خیلی ریز بیش‌تر از رسوبات رودخانه‌ای بوده و مقدار شن در رسوبات رودخانه‌ای بیش‌تر از رسوبات کوهی است. نتایج دانه‌بندی رسوبات نشان داد مدل فردلاند نسبت به سایر مدل‌ها، کارایی بهتری در توصیف توزیع اندازة رسوبات داشت. بر اساس نتایج به‌دست‌آمده از نمونه‌های آنالیز شده در مثلث بافت خاک، نمونه‌های برداشت‌شده از معادن کوهی و رودخانه‌ای به‌ترتیب در کلاس بافتی لومی شنی و شنی لومی بودند، لذا دارای بافت ریز تا متوسط دانه هستند. بر اساس نتایج دانه‌بندی رسوبات، بیش‌تر درصد رسوبات را به‌ترتیب شن، سیلت و شن بسیار ریز و رس تشکیل می‌دهد.}, keywords_fa = {رسوب,قطر ذرات,مدل فردلاند,معدن شن}, url = {https://mmws.uma.ac.ir/article_1631.html}, eprint = {https://mmws.uma.ac.ir/article_1631_0f7b505ceea0efd3b6dc241e2c6d6caf.pdf} }